Featured
Hot Water Heater Smells Like Sulfur
Hot Water Heater Smells Like Sulfur. When your water heater smells like sulfur, here’s what is probably happening. If you can’t, turn on the hot water faucet and if the rotten eggs smell hits your nose the problem is with the water heater.
Add enough hydrogen peroxide equivalent to the capacity of water in your heater through the water heater outlet. This smell can occur in cold water for a variety of reasons, but when it’s specific to hot water, your hot water heater is the most likely culprit. The water smells like rotten eggs or sulfur because of the high concentration of hydrogen sulfide (h2s) in the water.
It Is The Result Of A Chemical Reaction Taking Place Inside The Water Heater.
Locate and remove the anode rod. Well water or water softener increases the risk of this problem. Always be mindful when you are using chlorine.
Observe The Water Level Through The Closest Hot Water Faucet.
Posted on october 24, 2019 march 26, 2021 by jeff. The anode rod is a sacrificial rod that rusts first to protect the heating elements. In milder cases, it dissipates after the water runs a few minutes, but in severe cases, it can persist and spread throughout the house.
There Are Two Reasons Your Water May Smell Like Sulfur.
Even in small amounts, hydrogen sulfide makes the water develop a horrible taste and smell. Softened water can sometimes accumulate hydrogen sulfide gas, which gives off the offending “rotten egg” smell as it’s released. If there is an odour problem with the water supply, the first step is to determine the source.
The Most Common Cause Of Smelly Water Is Anaerobic Bacteria That Exist In Some Water And React.
Ask your plumber to be sure. Apply a concentrated chlorine treatment to your tank. The result of this reaction is the production of hydrogen sulfide, and as a result, the rotten egg smell.
A Corroded Magnesium Or Aluminium Anode Rod.
If the source of your water is a public water system and you have problems with smells in the cold water, contact your water utility, or call us for help. It will assist to solve the problem if you replace the anode rod with an aluminum rod. Open the pressure relief valve on the top of your water heater.
Popular Posts
How To Replace Fisher And Paykel Water Filter
- Get link
- X
- Other Apps
Comments
Post a Comment